UNIVERSAL Interface Rings & Rails Combination

The UNIVERSAL Interface System can be fitted to a mounting setup which has not got the UNI-Interface built into the mount itself. Additional mid-tube or objective-tube rings can be fitted to your scope, then a short section of picatinny rail can be attached and then your UV lamp or Torch can be attached to the rail.

Various Rings are available in different sizes to fit mid-tubes and objective lenses.
Plus there are a wide range of different components which fit to the UNI-Interface.

UNIVERSAL Interface Addons

As you may see from the ERATAC scope mounts above, they incorporate the UNIVERSAL Interface System. These adaptors fit onto the UNIVERSAL Interface System and allow additional mounts such as torches or red-dot sights to be mounted to a short section of rail.

UNIVERSAL Interface Addons - Offset

There are variations of the UNIVERSAL Interface System which allow an offset mount of your additional hardware. These mounts are designed with a 45º offset mounting position, available for Docter Sight and Aimpoint sights as well as picatinny rail. Other useful hardware such as a Bubble Level is available too.

UNIVERSAL Interface Rings

The UNI-Interface rings are available to fit on to mid-tubes or objective lenses. With sizes available for popular scope models ranging from 26mm to 62mm, covering a wide range.

Picatinny Offset Addons

Bubble Level for Picatinny Rail - To correct the firing position and avoid canting. The bubble level can be protected from damage by the rotatable sleeve. Mountable on the left or right side.

45º Offset Mount - Makes it easy to install a red dot sight at a 45° angle. To be used in combination with any of our spacers and adapters provided with the UNIVERSAL-Interface.

Picatinny Sights

Designed for tough military use with the precision of a competition sight.
• 2 ghost rings, 5 mm and 1.7 mm at same plane
• Spring-loaded folding mechanism reliantly protects the sight from damage during hard use
• Slim and ultra-low design, height when folded: only 9 mm /0.35”
• Same height as standard AR15 sight
• Replaceable posts, adjustable in height without any tools
• Absolutely corrosion-free, even under maritime conditions, thanks to special surface treatment

Picatinny Offset Sights

Just like our Backup-Sight for Picatinny Rail, but at a 45° angle, thus, allowing fast aiming at short distances without having to remove the scope.
• Mounting at a 45° angle directly on the Picatinny rail
• The sights can be folded down
• Convertible for left-handed shooters thanks to modular design
• Replaceable posts, adjustable in height without tools

Harris Bi-Pod Adaptor for Picatinny

To be fixed to Picatinny rails. The extra large mounting base allows an extremely tight attachment to the rail handguard. Fitted with the Generation 2 lightweight fixings, available in Nut or Quick Release options.

Harris Bi-Pod Sliding Adaptor for Picatinny

To be fixed to Picatinny rails. A sliding block provides a very solid connection. The original Harris clamping mechanism must be removed. Fitted with the Generation 2 lightweight fixings, available in Nut or Quick Release options.

KeyMod Accessories - Picatinny

Our KeyMod accessories are fully machined from solid, high-grade aluminum according to Mil-Spec. type III. They are very lightweight and contain no losable components. Various length of picatinny rail are available to provide a suitable base to mount rings, red-dot sights and other components.

KeyMod Accessories - Swivel Hardware

Our KeyMod accessories are fully machined from solid, high-grade aluminum according to Mil-Spec. type III. They are very lightweight and contain no losable components.

M-Lok Accessories

The M-Lok parts and accessories are fully machined from solid, high-grade aluminum according to Mil-Spec. type III. Including various lengths of picatinny rail, Harris Bipod Adaptors and swivel attachments.