One-Piece Ring Mounts

The ERATAC one-piece mounts are fully machined from solid, high-grade aluminum and have a hard anodized surface in a black matte finish according to Mil.-Spec. type III. The mounts are available with or without MOA. Extremely precise and feature an absolute repeatability. They come with safety levers (type T1) or nuts (type T2).

The short version mounts are suited for the use on any type of rifle, with a picatinny rail mounted to it.

One-Piece Extended Ring Mounts

The mounts with an extension of 2” or 3” are suited for the use on weapons of the type AR15. Mounts with a 2” extension are also suitable for the AR10. The extension also comes in useful with scopes requiring forward position for eye-relief. Fully machined from solid, high-grade aluminum and have a hard anodized surface in a black matte finish according to Mil.-Spec. type III. The mounts are available with or without MOA. Extremely precise and feature an absolute repeatability. They come with safety levers (type T1) or nuts (type T2).

Suited for the use on any type of rifle, with a picatinny rail mounted to it.

One-Piece Ultra Lightweight Mounts

Focusing onto the users’ needs, we developed a series of scope mounts that are characterized by a minimalistic design and especially, their very light weight. Compared to our standard one-piece mounts, the weight was reduced by approx. 50%. The mounts have deliberately been designed without the UNIVERSAL interface. The weight of the mounts starts at 122g.

All T3 Fixture, short ultralight models are suited for the use on any type of bolt action rifle.

One-Piece Ultra Lightweight Extended Mounts

The extended version is specifically intended for the use by authorities on assault rifles of the type AR15 and also during sporting events like IPSC. The extension of 56 mm offers sufficient eye-relief in any shooting position. The shortened mounting base facilitates grasping the power ring to adjust magnification. The manufacturing process is consistent with military standards. The hard anodized surface is a black matte finish according to Mil.-Spec. type III, ensuring that all components are absolutely rust-proof. The mount contains no losable parts and clamps onto the Picatinny rail by means of Torx screws resulting in a secure connection. The weight starts at 150g for these models.

All ultralight mounts have impressively proven their absolute strength up to caliber .50 in independent tests.

All T3 Fixture, short ultralight models are suited for the use on any type of bolt action rifle.

Ring Mounts (Nut Fixing)

Made of high-grade aluminum and hardcoat anodized in accordance to Mil-Spec; with hex nuts to fit Picatinny rails in spec. or out of spec. Available with 30 mm and 34 mm rings with UNIVERSAL-interface. Ring depth 25 mm.

Ring Mounts (Quick Release)

Made of high-grade aluminum and hardcoat anodized in accordance to Mil-Spec; with self locking
and adjustable steel levers to fit Picatinny rails in spec. or out of spec. Available with 30 mm and 34 mm rings with UNIVERSAL-interface. Ring depth 25 mm.

One-Piece Mounts for S&B 5-20x50 PM II

These one-piece mounts have been specifically designed to suit the Schmidt & Bender 5-20x50 PM II scope. Using the Generation 2 lightweight fixings, they are available in Nut (T5) or Quick Release Lever (T4) options.

Reduced weight and slimmed down design, offer a perfect option to mount the PM II scope to a picatinny rail.

One-Piece Extended Mounts for S&B 5-20x50 PM II

The extended version of the one-piece mount specifically designed to suit the Schmidt & Bender 5-20x50 PM II scope. With a 62.5mm extension, this mount offers the option to mount the scope to a picatinny rail with rear or forward extension to obtain the optimum eye relief.

Available in Nut (T5) or Quick Release Lever (T4) options

One-Piece Extended Mounts for S&B 5-20x50 PM II

The Steyr AUG-Z is equipped with the loading lever on the left side of the rifle and, therefore, requires the use of a scope mount with the locking mechanism on the right side. The mounts feature an integrated inclination of 10 MOA.

Available in Nut (T5) or Quick Release Lever (T4) options.
Ring size options of 30mm or 34mm are available.

Mounts for Aimpoint

Mounts to be used with the Aimpoint Series. The modular system makes it very easy to combine both the Aimpoint Comp and the Micro series sights with the 3X Magnifier. Among other configurations.