One-Piece Ring Mounts

The ERATAC one-piece mounts are fully machined from solid, high-grade aluminum and have a hard anodized surface in a black matte finish according to Mil.-Spec. type III. The mounts are available with or without MOA. Extremely precise and feature an absolute repeatability. They come with safety levers (type T1) or nuts (type T2).

The short version mounts are suited for the use on any type of rifle, with a picatinny rail mounted to it.

One-Piece Extended Ring Mounts

The mounts with an extension of 2” or 3” are suited for the use on weapons of the type AR15. Mounts with a 2” extension are also suitable for the AR10. The extension also comes in useful with scopes requiring forward position for eye-relief. Fully machined from solid, high-grade aluminum and have a hard anodized surface in a black matte finish according to Mil.-Spec. type III. The mounts are available with or without MOA. Extremely precise and feature an absolute repeatability. They come with safety levers (type T1) or nuts (type T2).

Suited for the use on any type of rifle, with a picatinny rail mounted to it.

One-Piece Ultra Lightweight Mounts

Focusing onto the users’ needs, we developed a series of scope mounts that are characterized by a minimalistic design and especially, their very light weight. Compared to our standard one-piece mounts, the weight was reduced by approx. 50%. The mounts have deliberately been designed without the UNIVERSAL interface. The weight of the mounts starts at 122g.

All T3 Fixture, short ultralight models are suited for the use on any type of bolt action rifle.

One-Piece Ultra Lightweight Extended Mounts

The extended version is specifically intended for the use by authorities on assault rifles of the type AR15 and also during sporting events like IPSC. The extension of 56 mm offers sufficient eye-relief in any shooting position. The shortened mounting base facilitates grasping the power ring to adjust magnification. The manufacturing process is consistent with military standards. The hard anodized surface is a black matte finish according to Mil.-Spec. type III, ensuring that all components are absolutely rust-proof. The mount contains no losable parts and clamps onto the Picatinny rail by means of Torx screws resulting in a secure connection. The weight starts at 150g for these models.

All ultralight mounts have impressively proven their absolute strength up to caliber .50 in independent tests.

All T3 Fixture, short ultralight models are suited for the use on any type of bolt action rifle.

Ring Mounts (Nut Fixing)

Made of high-grade aluminum and hardcoat anodized in accordance to Mil-Spec; with hex nuts to fit Picatinny rails in spec. or out of spec. Available with 30 mm and 34 mm rings with UNIVERSAL-interface. Ring depth 25 mm.

Ring Mounts (Quick Release)

Made of high-grade aluminum and hardcoat anodized in accordance to Mil-Spec; with self locking
and adjustable steel levers to fit Picatinny rails in spec. or out of spec. Available with 30 mm and 34 mm rings with UNIVERSAL-interface. Ring depth 25 mm.

Riser Blocks

For quick and easy mounting of lasers, flashlights, grips and other tactical accessories on Picatinny rails.
This mounting base provides extra clearing and can also be used to raise red-dot sights to eye-level.

One-Piece Adjustable MOA Mounts

The range of adjustable mounts give you the solid base for mounting your scope to your rifle onto a picatinny airl, they include optional features such as ring size and height. Plus with the Tactical UNIVERSAL Interface, it allows you to add additional components to your mount.

Picatinny Riser Mount

This is a picatinny to picatinny riser mount. The mount allows extension forwards or backwards, depending on which way you mount the riser, it extends 65mm in length and 15mm high. Ideal to gain the correct eye relief for Night Vision scopes. You can see the full measurements from the schematic image.

UNIVERSAL Interface Addons

As you may see from the ERATAC scope mounts above, they incorporate the UNIVERSAL Interface System. These adaptors fit onto the UNIVERSAL Interface System and allow additional mounts such as torches or red-dot sights to be mounted to a short section of rail.

UNIVERSAL Interface Addons - Offset

There are variations of the UNIVERSAL Interface System which allow an offset mount of your additional hardware. These mounts are designed with a 45º offset mounting position, available for Docter Sight and Aimpoint sights as well as picatinny rail. Other useful hardware such as a Bubble Level is available too.

UNIVERSAL Interface Rings/Rails

The UNIVERSAL Interface System is very versatile and parts such as a objective lens adaptor is available to have front mounted hardware.

Mounts for Aimpoint

Mounts to be used with the Aimpoint Series. The modular system makes it very easy to combine both the Aimpoint Comp and the Micro series sights with the 3X Magnifier. Among other configurations.